$1,296.00
Power two devices at the same time with the updated HYPSOS Dual Output Power Supply, featuring two power outputs.
PLEASE NOTE: Hypsos Dual-Output comes with ONE cable; auxiliary output cable must be purchased separately.
Comes with a high quality DC power cable fitted to order to connect to the most commonly used DC inputs. Custom cables can be made to order.
Linear/switching hybrid design to get the advantages from both techniques - low ripple and noise as well as fast transient response and high efficiency.
Possibility to fine tune the output voltage for the best sound. The voltage level can be safely adjusted on the fly to allow easy comparison testing.
Compatibility with Apple TV remote, Trigger in/out connector; possibility to automate power-up of the devices with standby mode even without dedicated trigger connection.
Makes your current audio setup perform to its potential. Tweak the sound modifying the voltage level on the fly and use the preferred combination of the 4-Terminal Sensing and Spread Spectrum Mode settings.
Using pre-configured settings from the list of supported devices or setting custom parameters manually. Wide continuous ouput voltage range of 5-30V with up to 6A of current delivered to the load. HYPSOS is as universal a device as it gets.
Ensuring the exact voltage level precisely at the point of the powered device DC input terminal - special cable design and feedback to ensure flat voltage at every moment. This technique eliminates the harmful effects of the cable's resistance effectively improving transient response.
Automatic Transformer Voltage Adjust (ATVA), Electronic Output Voltage Polarity Switch and overvoltage, current limit and short protection.
Power Input
110-120 V AC & 220-240 V AC / 50-60 Hz
DC Out
5-30V DC
Power Output
6A/80W
Max Continuous Output Power
60W
Maximum Continuous Output Current
6A
Primary winding fuse
250 V 2 A, slow-blow
Power consumption
230VAC, 50Hz @ 12VDC out: Idle – 6 VA, ~ 80 W load – 133.9 VA
Dimensions
21.7 cm x 20.6 cm x 5 cm
Weight
3.05kg