Our Take: A Small Amp with an Energetic Presentation
Anni is most compelling when desktop space is limited but you want to switch between headphones and passive speakers. Pair it with a DAC for computer audio or a phono stage for vinyl, rather than buying another all-in-one DAC/amp when you already have a source you enjoy.
In its Anni review, Headfonics describes a weighty, energetic and smooth presentation, emphasizing bass authority and musical drive rather than a strictly neutral, microscopic view of recordings. Those impressions were formed with Qutest and full-size headphones including the Meze Elite and Final D8000 Pro. Think engaging and substantial, not an assurance that every headphone will sound identical.
The speaker rating is intended for a compact setup. Speaker sensitivity, listening distance and desired level matter; a 10W amplifier is not a universal substitute for a high-power room system.
Headphones and Speakers: How Switching Works
Connecting headphones automatically disconnects the speaker output and selects low gain. Both headphone sockets can be used at the same time, but they share the same volume setting. The high/low gain button applies to speaker listening, not independent headphone gain adjustment.
Turn volume to zero before plugging in or removing headphones. Removing them reactivates any connected speakers. Push the volume knob to select input 1 or input 2; the indicator ring changes color to identify the selected source.
Building a Qutest-Range System
Chord Qutest provides digital-to-analog conversion ahead of Anni, while Chord Huei adds a phono stage for a turntable. These are optional, separately sold components; other suitable line-level analog sources can also be used.
Qutest setup: Chord specifies a Qutest output setting no higher than 2V when used with Anni. Follow the Qutest manual to select the appropriate output voltage.
Ventilation: Anni uses case ventilation and a cooling fan. Leave space around it and do not stack components directly on top. Chord's separately sold Qutest Stand System is designed to support a multi-component arrangement without blocking ventilation.
Technical Specifications
| Type |
Analog integrated headphone and speaker amplifier |
| Amplification |
Class AB sliding bias; ULTIMA-derived dual-feed-forward topology |
| Inputs |
2 × stereo unbalanced RCA line inputs |
| Headphone outputs |
3.5mm and 6.35mm; shared volume control |
| Speaker outputs |
4mm banana connections |
| Rated speaker power |
10W into 8Ω |
| Gain selection |
High/low for speakers; automatic low gain with headphones |
| Total harmonic distortion |
0.02% (manufacturer specification) |
| Frequency response |
5Hz–60kHz (−3dB) |
| Power supply |
External 15V / 6A switch-mode supply, included |
| Dimensions (W × H × D) |
160 × 42.5 × 96.6mm |
| Weight |
625g |
What's Included
- Chord Anni amplifier
- 1.5m 15V / 6A switch-mode power supply
- Anni manual
- Safety instructions
Video: Introducing Anni
Chord Electronics' official introduction to the Anni desktop amplifier.
A Closer Look
