Chord Berttie amplifier
"I’ve had this amp for about a year, and I’m extremely happy with it. But it again if it got stolen!!!"
A fully balanced stereo power amplifier that brings Chord's dual-feed-forward error correction to its Table Top range.
BerTTi drives passive loudspeakers from a volume-controlled preamplifier or DAC/preamp. It is not an integrated amplifier and does not contain a DAC or volume control.
BerTTi makes sense when you want to build a high-quality passive-speaker system around a DAC/preamp such as Hugo TT 2 without adding a full-size power amplifier. Its compact footprint suits a desktop or small equipment rack, but proper ventilation and a suitable speaker match still matter.
StereoNET's listening review highlights its insight, composure and control through complex music. That points toward an amplifier for listeners who value separation and rhythmic clarity rather than deliberately softened presentation. Those are the reviewer's system-specific impressions; the loudspeakers and room will strongly influence the result.
Chord's dual-feed-forward circuit monitors the signal and corrects errors before the output stage. BerTTi uses custom MOSFET output devices, two modified power supplies and an auxiliary front-end power rail. The aim is accurate amplification in a compact enclosure, rather than adding a deliberate tonal effect.
Use a volume-controlled line-level source or preamp, and choose either RCA or XLR inputs as directed in the manual. The loudspeaker terminals connect to passive speakers; the 12V trigger is a control connection, not an audio input. BerTTi contains no streaming, digital conversion or headphone output.
Hugo TT 2 provides the DAC, source selection and volume-control functions in Chord's matching system. An optional Hugo M Scaler belongs upstream of a compatible DAC, not directly into BerTTi.
Allow at least 10cm around the amplifier and keep its ventilation unobstructed. Internal fans respond to temperature. If stacking components, Chord advises placing BerTTi on top.

| Type | Fully balanced stereo power amplifier; ULTIMA dual-feed-forward topology |
|---|---|
| Rated output (user manual) | 75W per channel into 8Ω |
| Inputs | Stereo balanced XLR or unbalanced RCA; 12V trigger |
| Outputs | Left and right loudspeaker terminals |
| Frequency range | 5Hz–100kHz, ±0.5dB |
| THD | 0.008% |
| Signal-to-noise ratio | 87dB, A-weighted |
| Input impedance | 100kΩ, balanced and unbalanced |
| Input sensitivity | 0.78V |
| Gain | 30dB |
| Dimensions (H × W × D) | 59 × 235 × 256mm |
| Weight | 3.75kg |
| Finishes | Argent Silver; Jett Black |
Power rating follows Chord's BerTTi user manual and product introduction. The manufacturer's online specification table currently lists a conflicting 55W figure; please contact us if a specific continuous-power requirement is critical to your system.
Overall rating: 5.0 / 5 from 1 reviews.
Review topics: [].
"I’ve had this amp for about a year, and I’m extremely happy with it. But it again if it got stolen!!!"