iBasso D17 Atheris Portable DAC/Amp
iBasso D17 Atheris combines discrete R2R and 1-bit DAC architectures with dual Korg Nutube amplification, giving a transportable headphone system three distinct decoding paths.
- Discrete R2R and 64-unit PWM 1-bit DAC designs in one component.
- Two Korg Nutube 6P1 tubes with a balanced headphone-amplifier architecture.
- USB-C, coaxial and optical digital inputs; 4.4mm balanced and 3.5mm single-ended outputs.
- Separate DAC and amplifier batteries, stepped analog attenuation and digital volume control.
Our Take
D17 is for listeners who want more than a small USB dongle: a self-powered DAC/amp with physical volume controls, selectable decoding and a tube-based headphone stage. Its 470g body makes it better suited to a desk, bedside or travel bag than a lightweight pocket setup.
The appeal is flexibility within one system. You can compare R2R and 1-bit conversion without changing the source, headphones or amplifier. Use its headphone output directly, or select line output to feed a separate amplifier.
Three DAC Modes, Clearly Explained
NOS
PCM uses the R2R DAC; DSD uses the 1-bit DAC. This keeps each incoming format on its corresponding conversion path.
All to R2R (OS)
Incoming audio is converted to PCM for the R2R decoding path.
All to 1bit (SD)
Incoming audio is converted to DSD for the 1-bit decoding path.
These are DAC modes, not a tube-versus-solid-state headphone-amplifier switch. Compare at matched listening levels, since the output capabilities differ between conversion paths.
Discrete Conversion & Nutube Amplification
The R2R implementation includes 284 precision 0.01% film resistors. The separate 1-bit design uses 64 PWM-DAC units across its balanced channels. FPGA-Master 3.0 coordinates conversion with two Accusilicon oscillators.
Two Korg Nutube 6P1 devices provide the headphone stage's tube character, supported by TI BUF634A buffers and a 24V anode supply. Mechanical damping and a layered isolation structure reduce microphonic sensitivity; they should not be mistaken for a guarantee that physical knocks can never be audible.
Controls, Connections & Compatibility
A 24-position stepped analog attenuator works alongside DSP-based digital volume adjustment. The 1.3-inch OLED shows operating information; settings are controlled with the physical controls, not a touchscreen.
Connect a compatible computer, phone or digital player through the USB-C data port, or use a compatible optical/coaxial digital source. The separate USB-C charging port keeps power and audio connections distinct. USB host support, the correct data cable and playback-software support are required; a connector alone does not guarantee every device or format will work.
Technical Specifications
Architecture & Operation
| DAC architecture | Discrete R2R + discrete 1-bit PWM |
|---|---|
| DAC modes | NOS; All to R2R (OS); All to 1bit (SD) |
| Headphone amplification | Dual Korg Nutube 6P1; TI BUF634A buffers |
| Volume control | 24-position stepped analog attenuator plus digital adjustment |
| Display | 1.3-inch OLED |
| Inputs | USB-C data; coaxial and optical digital inputs |
| Outputs | 4.4mm balanced and 3.5mm single-ended; selectable headphone/line operation |
Line Output Levels
| DAC path / output | DAC low gain | DAC high gain |
|---|---|---|
| R2R / 4.4mm balanced | 2.4Vrms | 4Vrms |
| R2R / 3.5mm single-ended | 2Vrms | 2.4Vrms |
| 1-bit / 4.4mm balanced | 2Vrms | 2.4Vrms |
| 1-bit / 3.5mm single-ended | 1Vrms | 1.2Vrms |
Power & Portability
| Balanced headphone power, R2R | 1,200mW + 1,200mW into 32Ω |
|---|---|
| Single-ended headphone power, R2R | 320mW + 320mW into 32Ω |
| Balanced headphone power, 1-bit | 340mW + 340mW into 32Ω |
| Single-ended headphone power, 1-bit | 87mW + 87mW into 32Ω |
| Headphone output impedance | 4.4mm: 1.9Ω; 3.5mm: 1Ω |
| USB format support | PCM up to 768kHz; DSD up to DSD512 |
| Coaxial format support | PCM up to 768kHz; DoP up to DoP256 |
| Optical format support | PCM up to 192kHz; DoP up to DoP128 |
| Charging | Separate USB-C charging input; 5V/2A and QC3.0 support |
| Charging time | Approximately 3 hours |
| Playback time | Up to approximately 15 hours; actual runtime varies with mode, load and listening level |
| Dimensions | 145 × 86.3 × 31.6mm |
| Weight | 470g |
What's Included
- iBasso D17 Atheris DAC/amplifier
- Protective case
- Carrying pouch
- Supplied cable set
- User documentation
Support & Setup
Keep the supplied user documentation handy for output selection and gain settings.