way better than my last amp
"It sounds so realistic!"
Ferrum ERCO Gen 2 combines a balanced headphone amplifier, high-resolution USB DAC and analog preamplifier in one compact desktop component.
ERCO Gen 2 is a practical choice when you want a serious headphone system without assembling a separate DAC, amplifier and preamp. Connect a computer digitally, add another source through RCA, and use the line outputs with powered speakers or a separate power amplifier. Its front-panel input, gain and volume controls keep everyday operation straightforward.
ERCO Gen 2 is a DAC and headphone amplifier for listeners who want the headphones, rather than the amplifier, to set the presentation. SoundStage! Solo found it brought out spaciousness with the Sennheiser HD 6XX and noted that the DAC draws attention to what the connected headphones do well.
Those are subjective impressions, not a guarantee for every pairing. Choose gain to suit headphone sensitivity, begin with the volume low, and use the balanced power figures only when evaluating the balanced output.
Ferrum revised the current-to-voltage conversion stage and reworked its digital processing. The SERCE DSP engine uses the HQ Apodizing filter, while USB support extends to PCM 768kHz and DSD512. These are changes to the conversion architecture, not simply a new badge on the original ERCO.
The rear RCA sockets provide an analog input as well as a separate line output; the XLR sockets are outputs, not inputs. Use the variable line outputs when ERCO controls the volume of your speakers. Bypass provides a fixed-level line output for a downstream component with its own volume control.
Bypass caution: bypass affects the line outputs only. Turn downstream volume down before changing modes and do not feed a fixed-level signal directly into a system without suitable volume control. The headphone outputs retain their own volume control.
ERCO is a DAC/amplifier, not a network streamer. Its USB-C connector accepts audio from a compatible source; there is no built-in Wi-Fi or Bluetooth streaming. Ferrum's support page provides Windows USB drivers and the Ferrum Control application for firmware maintenance.
For an external power-supply option, see HYPSOS or HYPSOS Dual Output and the compatible Ferrum Power Link cable. FPL carries power and voltage-sensing connections. Follow Ferrum's setup instructions and use only one power input at a time.

| DAC | ESS Sabre ES9028PRO |
|---|---|
| USB-C input | PCM up to 32-bit/768kHz; native DSD512; DoP256 |
| Coaxial S/PDIF | PCM up to 24-bit/192kHz; DoP64 |
| Optical S/PDIF | PCM 24-bit/96kHz guaranteed; 192kHz and DoP64 depend on transmitter and cable |
| Analog input | Stereo RCA; 47kΩ input impedance |
| Headphone outputs | 4.4mm balanced; 6.35mm single-ended |
| Balanced output power | 6.1W into 50Ω; 1.2W into 300Ω |
| Single-ended output power | 1.7W into 50Ω; 300mW into 300Ω |
| Headphone output impedance | <0.3Ω |
| Gain, balanced | −5.8 / +6 / +17.8dB |
| Gain, single-ended | −11.8 / 0 / +11.8dB |
| Line outputs | XLR balanced, 4V RMS; RCA single-ended, 2V RMS |
| Volume control | Analog; bypass available for line outputs only |
| Frequency response | 10Hz–30kHz ±0.05dB; 10Hz–200kHz ±1dB |
| MQA capability | Decoder and renderer |
| DC connections | 5.5/2.5mm center-positive DC jack or proprietary 4-pin FPL |
| Dimensions (W × D × H) | 217 × 206 × 50mm |
| Weight | 1.8kg / 3.97lb |
Specifications are manufacturer ratings. Maximum digital formats depend on the selected input, source and playback software.
Overall rating: 5.0 / 5 from 2 reviews.
Review topics: [].
"It sounds so realistic!"
"Great sounding unit. It sounds alive, clean, neutral, yet not ear fatiguing... just as they advertise. Smooth is the word that comes to mind. IMHO best dacamp combo under 2k. Plus the advantage of a small form factor. This was my very first purchasing experience with Headamp. Amazing service. Had my unit to me in 2 days, very well packaged. I mean, very well packaged. I love their selection of audio gear so I think I found my goto dealer."